A sprinkler zone may stay dry or keep running when its valve fails. Sprinkler Master Repair troubleshoots irrigation valves, solenoids, and their controls in Logan and Cache Valley.
Call (435) 760-0827 for valve repair
Which valve problem are you seeing?
One zone will not start
Hunter lists water-supply, voltage, and blocked internal-port problems among the reasons a valve may not open. A dead zone does not automatically mean the controller needs replacement. [1]
Water keeps running
A valve may pass water after the controller stops calling for it. Read our guide to sprinklers that keep running and call for help identifying the cause.
Water collects in the valve box
We inspect the valve body and nearby connections. For water appearing elsewhere in the lawn, start with sprinkler leak detection and repair.
A low sprinkler keeps dripping
Hunter distinguishes temporary drainage from water passing through a leaking zone valve. Those are different problems, and a head check valve cannot fix a leaking zone valve. [2]
Need the water to stop?
Stop the watering cycle. If flow continues and you can safely identify the irrigation shutoff, close the sprinkler water supply. Do not open a pressurized valve or handle flooded electrical equipment. Tell us whether the water continues with the controller off.
How we check a sprinkler valve
- Identify the affected zone. We review the symptoms, controller response, and access to the valve box.
- Check the valve and wiring. We investigate water supply, valve operation, solenoid, and wiring as appropriate.
- Discuss repair options. Cleaning, compatible internal parts, a solenoid, or a complete valve may be appropriate. We explain the work and pricing first.
- Test the result. We check that the zone starts, waters, and stops as expected.
Valve repair questions
Does every bad valve need to be replaced?
No. The condition of the body, available parts, and diagnosis determine the options. Hunter notes that debris or diaphragm damage can cause leaking through a valve. [2]
Is the solenoid the same as the valve?
The solenoid is the electrically operated part attached to the valve. Replacing it will not resolve every internal valve or pipe problem. We check the cause before recommending parts.
Could the timer be the problem?
Yes, but wiring and water-supply problems can look similar. We can check the wiring and discuss timer and controller repair. [1]
Why does the lowest head drain after watering?
Water remaining in the zone may drain through its lowest outlet and then stop. If water keeps flowing, have the valve checked. See head repair and replacement for head-related issues. [2]
What affects the price?
Access, valve size, compatible parts, nearby piping, and diagnostic time affect the work. Call for current service charges and see what affects repair cost.
Can you check the system before winter?
Ask about winterization and blowouts. Mention any zone that cannot open or close so we can plan for the problem before seasonal shutdown.
Local service in Logan and Cache Valley
Call for availability in Logan, North Logan, Smithfield, Providence, and nearby communities. See our complete service-area directory and tell us your address when you call.
Sprinkler Master beyond Cache Valley
Helping someone outside our local area? Visit Sprinkler Master in Boise and the Treasure Valley or Dr. Sprinkler Master in Utah County. Each location confirms its own service area, scheduling, and pricing.
Sources and helpful reading
- Hunter: Valve Not Opening — water supply, solenoid, and control-path diagnosis.
- Hunter: Valves Weeping or Leaking When Off — drainage versus a valve that passes water.
- EPA WaterSense: Sprinkler Spruce-Up — checking irrigation connections and valves.
Get help with a sprinkler valve
Tell us your town, the symptoms, and any recent work on the system. We will discuss availability and the next step.
All sprinkler services · Sprinkler FAQs · Meet the team and read reviews